16x24x4 air filter size
A 16x24x4 is a 4-inch furnace and AC filter with a 16 by 24 inch nominal face. That printed size is for ordering. Filterbuy publishes its 16x24x4 cut at 15.38 × 23.38 × 3.63 in, which is 0.62 inch under on the 16-inch side, 0.62 inch under on the 24-inch side, and 0.37 inch thinner than the nominal 4 inch.
- Nominal size (what you order)
- 16 × 24 × 4 in
Nominal face area 16 × 24 = 384 square inches.
- Filterbuy published actual size
- 15.38 × 23.38 × 3.63 in
Other brands may cut this size slightly differently. Read the label on the filter you have.
16x24x4 actual dimensions
| Brand / product | Published actual size | Source |
|---|---|---|
| Filterbuy 16x24x4 (model AFB16x24x4M8) | 15.38 × 23.38 × 3.63 in | Filterbuy 16x24x4 page, its production cut |
Checking that 16x24x4 is your size
Start with the nominal size printed on the old filter’s frame; if it reads 16x24x4, order that. If the print is gone, measure the old filter. A reading near 15.38 by 23.38 inches and about 3.63 inches thick matches Filterbuy’s published 16x24x4 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.
16x24 in other depths
The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.
| Size | Published actual size | Slot depth |
|---|---|---|
| 16x24x4 (this page) | 15.38 × 23.38 × 3.63 in | 4-inch |
| 16x24x1 | 15.38 × 23.38 × 0.75 in | 1-inch |
| 16x24x2 | 15.38 × 23.38 × 1.75 in | 2-inch |
Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.
What a 4-inch 16x24x4 fits
A 16x24x4 only fits a system built with a 4-inch media cabinet or slot; Filterbuy’s 4-inch guide says a 1-inch slot will not take one. Filterbuy cuts its 4-inch filters about 3.63 inches deep.
Some media cabinets, such as Honeywell’s, take a filter about 4-3/8 inches deep that may be labeled 4-inch by one brand and 5-inch by another; Filterbuy sells that depth as 5-inch. Its 20x25x4 guide uses depth to tell them apart: an old filter 3.75 inches deep or less is a standard 4-inch; one between 4.25 and 4.5 inches calls for the 5-inch version.
How often to replace a 16x24x4
- Filterbuy’s 4-inch guide says a 4-inch filter typically goes several months between changes, depending on the system, MERV rating, pets and air quality.
- Its 16x25x2 depth comparison lists 3 to 6 months for a 4-inch filter.
- Those figures differ, so treat your cabinet or filter maker’s instructions as the deciding source.
MERV options for 16x24x4
Filterbuy lists its 16x24x4 in MERV 8, 11 and 13. The EPA describes MERV as the ASHRAE 52.2 rating of how well a filter captures 0.3 to 10 micron particles; higher numbers capture more, but a denser filter can restrict airflow in some systems. This site makes no health or medical claims about any rating.
Nearby 4-inch sizes
- 16x25x4 — 1 in longer on the nominal face; Filterbuy actual 15.5 × 24.5 × 3.63 in
- 18x24x4 — 2 in wider on the nominal face; Filterbuy actual 17.5 × 23.38 × 3.63 in
- 12x24x4 — 4 in narrower on the nominal face; Filterbuy actual 11.5 × 23.38 × 3.63 in
- 16x20x4 — 4 in shorter on the nominal face; Filterbuy actual 15.5 × 19.5 × 3.63 in
- 20x24x4 — 4 in wider on the nominal face; Filterbuy actual 19.38 × 23.38 × 3.63 in
- 16x16x4 — 8 in shorter on the nominal face; Filterbuy actual 15.5 × 15.5 × 3.63 in
Where to buy a 16x24x4
As an Amazon Associate I earn from qualifying purchases.
The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.
Shop 16x24x4 at Filterbuy Search 16x24x4 filters on Amazon (paid link)
Prices are omitted because they change. Check the actual size listed by the seller before you order.
Frequently asked questions
- My old filter measures about 15.38 by 23.38 inches. Is it a 16x24x4?
- Very likely, if it is also about 3.63 inches thick. That matches Filterbuy’s published 16x24x4 cut of 15.38 × 23.38 × 3.63 in. Confirm with the nominal size on the frame when you can.
- Can I use a 16x24x1 instead of a 16x24x4?
- No. They share a 16 by 24 face, but a 1-inch filter needs a 1-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.
Sources
- Filterbuy, “16x24x4 Air Filters,” published actual size 15.38 × 23.38 × 3.63 in, model AFB16x24x4M8, available ratings (retrieved 2026-11-19): https://filterbuy.com/air-filters/16x24x4/
- Filterbuy, “4 Inch Air Filters,” media cabinet requirement and change interval: https://filterbuy.com/four-inch-air-filters/
- Filterbuy, “16x25x2 Air Filters,” depth comparison of 1-, 2- and 4-inch filters: https://filterbuy.com/air-filters/16x25x2/
- Filterbuy, “20x25x4 Air Filters,” telling a 4-inch from a 5-inch media filter by depth: https://filterbuy.com/air-filters/20x25x4/
- U.S. EPA, “Guide to Air Cleaners in the Home,” including fit guidance and typical 60- to 90-day replacement: https://www.epa.gov/indoor-air-quality-iaq/guide-air-cleaners-home
- U.S. EPA, “What is a MERV rating?”: https://www.epa.gov/indoor-air-quality-iaq/what-merv-rating