Filter Size Chart

Home / Furnace & AC filters / 17x21x1

17x21x1 air filter size

A 17x21x1 is a 1-inch furnace and AC filter with a 17 by 21 inch nominal face. That printed size is for ordering. Filterbuy publishes its 17x21x1 cut at 16.5 × 20.5 × 0.75 in, which is 0.5 inch under on the 17-inch side, 0.5 inch under on the 21-inch side, and 0.25 inch thinner than the nominal 1 inch.

Nominal size (what you order)
17 × 21 × 1 in

Nominal face area 17 × 21 = 357 square inches.

Filterbuy published actual size
16.5 × 20.5 × 0.75 in

Other brands may cut this size slightly differently. Read the label on the filter you have.

17x21x1 actual dimensions

Published actual dimensions for filters sold as 17x21x1. Figures are from the sources cited, not from measurements made for this site.
Brand / product Published actual size Source
Filterbuy 17x21x1 (model AFB16.5x21x1M8A=001) 16.5 × 20.5 × 0.75 in Filterbuy 17x21x1 page, its production cut

Checking that 17x21x1 is your size

Start with the nominal size printed on the old filter’s frame; if it reads 17x21x1, order that. If the print is gone, measure the old filter. A reading near 16.5 by 20.5 inches and about 0.75 inch thick matches Filterbuy’s published 17x21x1 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.

What a 1-inch 17x21x1 fits

A 17x21x1 goes in a standard 1-inch filter slot: usually a slide-in opening next to the furnace or air handler, or behind a return-air grille, which Trane lists as the common filter locations. Filterbuy cuts its 1-inch filters 0.75 inch deep. A 17x21x1 is not a substitute for a 2-inch or 4-inch filter of the same face size; order the depth your slot was built for.

How often to replace a 17x21x1

MERV options for 17x21x1

Filterbuy lists its 17x21x1 in MERV 8, 11 and 13. MERV is the ASHRAE 52.2 efficiency scale. Per the EPA, higher values trap more particles between 0.3 and 10 microns; check your equipment manual before moving to a higher rating, because airflow resistance can rise. This site makes no health or medical claims about any rating.

Nearby 1-inch sizes

Where to buy a 17x21x1

As an Amazon Associate I earn from qualifying purchases.

The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.

Shop 17x21x1 at Filterbuy Search 17x21x1 filters on Amazon

Prices are omitted because they change. Check the actual size listed by the seller before you order.

Frequently asked questions

My old filter measures about 16.5 by 20.5 inches. Is it a 17x21x1?
Very likely, if it is also about 0.75 inch thick. That matches Filterbuy’s published 17x21x1 cut of 16.5 × 20.5 × 0.75 in. Confirm with the nominal size on the frame when you can.

Sources