Filter Size Chart

Home / Furnace & AC filters / 20x25x1

20x25x1 air filter size

A 20x25x1 is a 1-inch furnace and AC filter with a 20 by 25 inch nominal face. That printed size is for ordering. Filterbuy publishes its 20x25x1 cut at 19.5 × 24.5 × 0.75 in, which is 0.5 inch under on the 20-inch side, 0.5 inch under on the 25-inch side, and 0.25 inch thinner than the nominal 1 inch.

Nominal size (what you order)
20 × 25 × 1 in

Nominal face area 20 × 25 = 500 square inches.

Filterbuy published actual size
19.5 × 24.5 × 0.75 in

Other brands may cut this size slightly differently. Read the label on the filter you have.

20x25x1 actual dimensions

Published actual dimensions for filters sold as 20x25x1. Figures are from the sources cited, not from measurements made for this site.
Brand / product Published actual size Source
Filterbuy 20x25x1 (model AFB20x25x1M8) 19.5 × 24.5 × 0.75 in Filterbuy 20x25x1 page, its production cut

Filterbuy’s 16x25x2 page points out that brands disagree on this size: it cites 19.50 inches for Filterbuy, 19.68 for Filtrete and 19.75 for Amazon Basics on the 20-inch side, so measure before switching brands. (source)

Checking that 20x25x1 is your size

Start with the nominal size printed on the old filter’s frame; if it reads 20x25x1, order that. If the print is gone, measure the old filter. A reading near 19.5 by 24.5 inches and about 0.75 inch thick matches Filterbuy’s published 20x25x1 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.

20x25 in other depths

The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.

SizePublished actual sizeSlot depth
20x25x1 (this page)19.5 × 24.5 × 0.75 in1-inch
20x25x219.5 × 24.5 × 1.75 in2-inch
20x25x419.5 × 24.5 × 3.63 in4-inch
20x25x5see page5-inch

Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.

What a 1-inch 20x25x1 fits

A 20x25x1 goes in a standard 1-inch filter slot: usually a slide-in opening next to the furnace or air handler, or behind a return-air grille, which Trane lists as the common filter locations. Filterbuy cuts its 1-inch filters 0.75 inch deep. A 20x25x1 is not a substitute for a 2-inch or 4-inch filter of the same face size; order the depth your slot was built for.

How often to replace a 20x25x1

MERV options for 20x25x1

Filterbuy lists its 20x25x1 in MERV 8, 11 and 13 plus an Odor Eliminator version with an activated carbon layer (see carbon filters). MERV comes from ASHRAE Standard 52.2. The EPA explains that a higher MERV captures more of the particles in the 0.3 to 10 micron test range, and that a higher rating can also add airflow resistance, so pick one your system accepts. This site makes no health or medical claims about any rating.

Nearby 1-inch sizes

Where to buy a 20x25x1

As an Amazon Associate I earn from qualifying purchases.

The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.

Shop 20x25x1 at Filterbuy Search 20x25x1 filters on Amazon

Prices are omitted because they change. Check the actual size listed by the seller before you order.

Frequently asked questions

My old filter measures about 19.5 by 24.5 inches. Is it a 20x25x1?
Very likely, if it is also about 0.75 inch thick. That matches Filterbuy’s published 20x25x1 cut of 19.5 × 24.5 × 0.75 in. Confirm with the nominal size on the frame when you can.
Can I use a 20x25x2 instead of a 20x25x1?
No. They share a 20 by 25 face, but a 2-inch filter needs a 2-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.

Sources