Filter Size Chart

Home / Furnace & AC filters / 12x12x1

12x12x1 air filter size

A 12x12x1 is a 1-inch furnace and AC filter with a 12 by 12 inch nominal face. That printed size is for ordering. Filterbuy publishes its 12x12x1 cut at 11.75 × 11.75 × 0.75 in, which is 0.25 inch under on the 12-inch side, 0.25 inch under on the 12-inch side, and 0.25 inch thinner than the nominal 1 inch.

Nominal size (what you order)
12 × 12 × 1 in

Nominal face area 12 × 12 = 144 square inches.

Filterbuy published actual size
11.75 × 11.75 × 0.75 in

Other brands may cut this size slightly differently. Read the label on the filter you have.

12x12x1 actual dimensions

Published actual dimensions for filters sold as 12x12x1. Figures are from the sources cited, not from measurements made for this site.
Brand / product Published actual size Source
Filterbuy 12x12x1 (model AFB12x12x1M8) 11.75 × 11.75 × 0.75 in Filterbuy 12x12x1 page, its production cut

Checking that 12x12x1 is your size

Start with the nominal size printed on the old filter’s frame; if it reads 12x12x1, order that. If the print is gone, measure the old filter. A reading near 11.75 by 11.75 inches and about 0.75 inch thick matches Filterbuy’s published 12x12x1 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.

12x12 in other depths

The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.

SizePublished actual sizeSlot depth
12x12x1 (this page)11.75 × 11.75 × 0.75 in1-inch
12x12x211.5 × 11.5 × 1.75 in2-inch

Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.

What a 1-inch 12x12x1 fits

A 12x12x1 goes in a standard 1-inch filter slot: usually a slide-in opening next to the furnace or air handler, or behind a return-air grille, which Trane lists as the common filter locations. Filterbuy cuts its 1-inch filters 0.75 inch deep. A 12x12x1 is not a substitute for a 2-inch or 4-inch filter of the same face size; order the depth your slot was built for.

How often to replace a 12x12x1

MERV options for 12x12x1

Filterbuy lists its 12x12x1 in MERV 8, 11 and 13. The EPA describes MERV as the ASHRAE 52.2 rating of how well a filter captures 0.3 to 10 micron particles; higher numbers capture more, but a denser filter can restrict airflow in some systems. This site makes no health or medical claims about any rating.

Nearby 1-inch sizes

Where to buy a 12x12x1

As an Amazon Associate I earn from qualifying purchases.

The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.

Shop 12x12x1 at Filterbuy Search 12x12x1 filters on Amazon

Prices are omitted because they change. Check the actual size listed by the seller before you order.

Frequently asked questions

My old filter measures about 11.75 by 11.75 inches. Is it a 12x12x1?
Very likely, if it is also about 0.75 inch thick. That matches Filterbuy’s published 12x12x1 cut of 11.75 × 11.75 × 0.75 in. Confirm with the nominal size on the frame when you can.
Can I use a 12x12x2 instead of a 12x12x1?
No. They share a 12 by 12 face, but a 2-inch filter needs a 2-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.

Sources