12x20x1 air filter size
A 12x20x1 is a 1-inch furnace and AC filter with a 12 by 20 inch nominal face. That printed size is for ordering. Filterbuy publishes its 12x20x1 cut at 11.5 × 19.5 × 0.75 in, which is 0.5 inch under on the 12-inch side, 0.5 inch under on the 20-inch side, and 0.25 inch thinner than the nominal 1 inch.
- Nominal size (what you order)
- 12 × 20 × 1 in
Nominal face area 12 × 20 = 240 square inches.
- Filterbuy published actual size
- 11.5 × 19.5 × 0.75 in
Other brands may cut this size slightly differently. Read the label on the filter you have.
12x20x1 actual dimensions
| Brand / product | Published actual size | Source |
|---|---|---|
| Filterbuy 12x20x1 (model AFB12x20x1M8) | 11.5 × 19.5 × 0.75 in | Filterbuy 12x20x1 page, its production cut |
Checking that 12x20x1 is your size
Start with the nominal size printed on the old filter’s frame; if it reads 12x20x1, order that. If the print is gone, measure the old filter. A reading near 11.5 by 19.5 inches and about 0.75 inch thick matches Filterbuy’s published 12x20x1 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.
12x20 in other depths
The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.
| Size | Published actual size | Slot depth |
|---|---|---|
| 12x20x1 (this page) | 11.5 × 19.5 × 0.75 in | 1-inch |
| 12x20x2 | 11.5 × 19.5 × 1.75 in | 2-inch |
| 12x20x4 | 11.5 × 19.5 × 3.63 in | 4-inch |
Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.
What a 1-inch 12x20x1 fits
A 12x20x1 goes in a standard 1-inch filter slot: usually a slide-in opening next to the furnace or air handler, or behind a return-air grille, which Trane lists as the common filter locations. Filterbuy cuts its 1-inch filters 0.75 inch deep. A 12x20x1 is not a substitute for a 2-inch or 4-inch filter of the same face size; order the depth your slot was built for.
How often to replace a 12x20x1
- Filtrete says to change a 1-inch filter at least every 90 days.
- Filterbuy’s 4-inch guide contrasts its several-month interval with every 1 to 3 months for a 1-inch panel, depending on the system, MERV rating, pets and air quality.
- The EPA says manufacturers typically recommend replacement every 60 to 90 days, and to change sooner if filters look heavily soiled.
MERV options for 12x20x1
Filterbuy lists its 12x20x1 in MERV 8, 11 and 13 plus an Odor Eliminator version with an activated carbon layer (see carbon filters). MERV is the ASHRAE 52.2 efficiency scale. Per the EPA, higher values trap more particles between 0.3 and 10 microns; check your equipment manual before moving to a higher rating, because airflow resistance can rise. This site makes no health or medical claims about any rating.
Nearby 1-inch sizes
- 10x20x1 — 2 in narrower on the nominal face; Filterbuy actual 9.5 × 19.5 × 0.75 in
- 14x20x1 — 2 in wider on the nominal face; Filterbuy actual 13.5 × 19.5 × 0.75 in
- 15x20x1 — 3 in wider on the nominal face; Filterbuy actual 14.5 × 19.5 × 0.75 in
- 12x24x1 — 4 in longer on the nominal face; Filterbuy actual 11.5 × 23.5 × 0.75 in
- 16x20x1 — 4 in wider on the nominal face; Filterbuy actual 15.5 × 19.5 × 0.75 in
- 18x20x1 — 6 in wider on the nominal face; Filterbuy actual 17.5 × 19.5 × 0.75 in
Where to buy a 12x20x1
As an Amazon Associate I earn from qualifying purchases.
The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.
Shop 12x20x1 at Filterbuy Search 12x20x1 filters on Amazon (paid link)
Prices are omitted because they change. Check the actual size listed by the seller before you order.
Frequently asked questions
- My old filter measures about 11.5 by 19.5 inches. Is it a 12x20x1?
- Very likely, if it is also about 0.75 inch thick. That matches Filterbuy’s published 12x20x1 cut of 11.5 × 19.5 × 0.75 in. Confirm with the nominal size on the frame when you can.
- Can I use a 12x20x2 instead of a 12x20x1?
- No. They share a 12 by 20 face, but a 2-inch filter needs a 2-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.
Sources
- Filterbuy, “12x20x1 Air Filters,” published actual size 11.5 × 19.5 × 0.75 in, model AFB12x20x1M8, available ratings (retrieved 2026-11-19): https://filterbuy.com/air-filters/12x20x1/
- Filtrete / 3M, 1-inch MPR 1900 filter page, change at least every 90 days: https://www.filtrete.com/3M/en_US/p/d/b00039899/
- Filterbuy, “4 Inch Air Filters,” media cabinet requirement and change interval: https://filterbuy.com/four-inch-air-filters/
- U.S. EPA, “Guide to Air Cleaners in the Home,” including fit guidance and typical 60- to 90-day replacement: https://www.epa.gov/indoor-air-quality-iaq/guide-air-cleaners-home
- Trane, “Furnace Filter Guide,” on filter locations next to the furnace or air handler and at return vents: https://www.trane.com/residential/en/resources/troubleshooting/gas-furnaces/furnace-filter-guide/
- U.S. EPA, “What is a MERV rating?”: https://www.epa.gov/indoor-air-quality-iaq/what-merv-rating