Filter Size Chart

Home / Furnace & AC filters / 10x20x1

10x20x1 air filter size

A 10x20x1 is a 1-inch furnace and AC filter with a 10 by 20 inch nominal face. That printed size is for ordering. Filterbuy publishes its 10x20x1 cut at 9.5 × 19.5 × 0.75 in, which is 0.5 inch under on the 10-inch side, 0.5 inch under on the 20-inch side, and 0.25 inch thinner than the nominal 1 inch.

Nominal size (what you order)
10 × 20 × 1 in

Nominal face area 10 × 20 = 200 square inches.

Filterbuy published actual size
9.5 × 19.5 × 0.75 in

Other brands may cut this size slightly differently. Read the label on the filter you have.

10x20x1 actual dimensions

Published actual dimensions for filters sold as 10x20x1. Figures are from the sources cited, not from measurements made for this site.
Brand / product Published actual size Source
Filterbuy 10x20x1 (model AFB10x20x1M8) 9.5 × 19.5 × 0.75 in Filterbuy 10x20x1 page, its production cut

Checking that 10x20x1 is your size

Start with the nominal size printed on the old filter’s frame; if it reads 10x20x1, order that. If the print is gone, measure the old filter. A reading near 9.5 by 19.5 inches and about 0.75 inch thick matches Filterbuy’s published 10x20x1 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.

What a 1-inch 10x20x1 fits

A 10x20x1 goes in a standard 1-inch filter slot: usually a slide-in opening next to the furnace or air handler, or behind a return-air grille, which Trane lists as the common filter locations. Filterbuy cuts its 1-inch filters 0.75 inch deep. A 10x20x1 is not a substitute for a 2-inch or 4-inch filter of the same face size; order the depth your slot was built for.

How often to replace a 10x20x1

MERV options for 10x20x1

Filterbuy lists its 10x20x1 in MERV 8, 11 and 13. The EPA describes MERV as the ASHRAE 52.2 rating of how well a filter captures 0.3 to 10 micron particles; higher numbers capture more, but a denser filter can restrict airflow in some systems. This site makes no health or medical claims about any rating.

Nearby 1-inch sizes

Where to buy a 10x20x1

As an Amazon Associate I earn from qualifying purchases.

The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.

Shop 10x20x1 at Filterbuy Search 10x20x1 filters on Amazon

Prices are omitted because they change. Check the actual size listed by the seller before you order.

Frequently asked questions

My old filter measures about 9.5 by 19.5 inches. Is it a 10x20x1?
Very likely, if it is also about 0.75 inch thick. That matches Filterbuy’s published 10x20x1 cut of 9.5 × 19.5 × 0.75 in. Confirm with the nominal size on the frame when you can.

Sources