Filter Size Chart

Home / Furnace & AC filters / 16x20x1

16x20x1 air filter size

A 16x20x1 is a 1-inch furnace and AC filter with a 16 by 20 inch nominal face. That printed size is for ordering. Filterbuy publishes its 16x20x1 cut at 15.5 × 19.5 × 0.75 in, which is 0.5 inch under on the 16-inch side, 0.5 inch under on the 20-inch side, and 0.25 inch thinner than the nominal 1 inch.

Nominal size (what you order)
16 × 20 × 1 in

Nominal face area 16 × 20 = 320 square inches.

Filterbuy published actual size
15.5 × 19.5 × 0.75 in

Other brands may cut this size slightly differently. Read the label on the filter you have.

16x20x1 actual dimensions

Published actual dimensions for filters sold as 16x20x1. Figures are from the sources cited, not from measurements made for this site.
Brand / product Published actual size Source
Filterbuy 16x20x1 (model AFB16x20x1M8) 15.5 × 19.5 × 0.75 in Filterbuy 16x20x1 page, its production cut
Filtrete 16x20x1 MERV 8 15.688 × 19.688 × 0.78 in As listed on Filterbuy’s 16x20x1 page (figures it attributes to each manufacturer’s published listings)
Filtrete 16x20x1 MERV 11 15.68 × 19.68 × 0.81 in As listed on Filterbuy’s 16x20x1 page (figures it attributes to each manufacturer’s published listings)
Filtrete 16x20x1 flat panel 15.7 × 19.6 × 0.8125 in As listed on Filterbuy’s 16x20x1 page (figures it attributes to each manufacturer’s published listings)

Checking that 16x20x1 is your size

Start with the nominal size printed on the old filter’s frame; if it reads 16x20x1, order that. If the print is gone, measure the old filter. A reading near 15.5 by 19.5 inches and about 0.75 inch thick matches Filterbuy’s published 16x20x1 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.

16x20 in other depths

The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.

SizePublished actual sizeSlot depth
16x20x1 (this page)15.5 × 19.5 × 0.75 in1-inch
16x20x215.5 × 19.5 × 1.75 in2-inch
16x20x415.5 × 19.5 × 3.63 in4-inch

Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.

What a 1-inch 16x20x1 fits

A 16x20x1 goes in a standard 1-inch filter slot: usually a slide-in opening next to the furnace or air handler, or behind a return-air grille, which Trane lists as the common filter locations. Filterbuy cuts its 1-inch filters 0.75 inch deep. A 16x20x1 is not a substitute for a 2-inch or 4-inch filter of the same face size; order the depth your slot was built for.

How often to replace a 16x20x1

MERV options for 16x20x1

Filterbuy lists its 16x20x1 in MERV 8, 11 and 13 plus an Odor Eliminator version with an activated carbon layer (see carbon filters). MERV is the ASHRAE 52.2 efficiency scale. Per the EPA, higher values trap more particles between 0.3 and 10 microns; check your equipment manual before moving to a higher rating, because airflow resistance can rise. This site makes no health or medical claims about any rating.

Nearby 1-inch sizes

Where to buy a 16x20x1

As an Amazon Associate I earn from qualifying purchases.

The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.

Shop 16x20x1 at Filterbuy Search 16x20x1 filters on Amazon

Prices are omitted because they change. Check the actual size listed by the seller before you order.

Frequently asked questions

My old filter measures about 15.5 by 19.5 inches. Is it a 16x20x1?
Very likely, if it is also about 0.75 inch thick. That matches Filterbuy’s published 16x20x1 cut of 15.5 × 19.5 × 0.75 in. Confirm with the nominal size on the frame when you can.
Can I use a 16x20x2 instead of a 16x20x1?
No. They share a 16 by 20 face, but a 2-inch filter needs a 2-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.

Sources