16x20x2 air filter size
A 16x20x2 is a 2-inch furnace and AC filter with a 16 by 20 inch nominal face. That printed size is for ordering. Filterbuy publishes its 16x20x2 cut at 15.5 × 19.5 × 1.75 in, which is 0.5 inch under on the 16-inch side, 0.5 inch under on the 20-inch side, and 0.25 inch thinner than the nominal 2 inch.
- Nominal size (what you order)
- 16 × 20 × 2 in
Nominal face area 16 × 20 = 320 square inches.
- Filterbuy published actual size
- 15.5 × 19.5 × 1.75 in
Other brands may cut this size slightly differently. Read the label on the filter you have.
16x20x2 actual dimensions
| Brand / product | Published actual size | Source |
|---|---|---|
| Filterbuy 16x20x2 (model AFB16x20x2M8) | 15.5 × 19.5 × 1.75 in | Filterbuy 16x20x2 page, its production cut |
Checking that 16x20x2 is your size
Start with the nominal size printed on the old filter’s frame; if it reads 16x20x2, order that. If the print is gone, measure the old filter. A reading near 15.5 by 19.5 inches and about 1.75 inches thick matches Filterbuy’s published 16x20x2 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.
16x20 in other depths
The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.
| Size | Published actual size | Slot depth |
|---|---|---|
| 16x20x2 (this page) | 15.5 × 19.5 × 1.75 in | 2-inch |
| 16x20x1 | 15.5 × 19.5 × 0.75 in | 1-inch |
| 16x20x4 | 15.5 × 19.5 × 3.63 in | 4-inch |
Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.
What a 2-inch 16x20x2 fits
A 16x20x2 needs a 2-inch filter rack. Filterbuy cuts its 2-inch media to 1.75 inches deep, against 0.75 inch for its 1-inch filters, and its 16x25x2 guide notes that two 1-inch filters cannot be stacked to make up the depth. Filterbuy’s 2-inch guide says a 2-inch filter will not fit a 1-inch rack, so measure the slot depth before ordering.
How often to replace a 16x20x2
- Filterbuy’s 2-inch guide answers “about every 90 days in a typical home,” sooner with pets or heavy pollen or wildfire smoke.
- Its 16x25x2 comparison lists the same 60- to 90-day band for 1-inch and 2-inch filters: the extra depth adds margin rather than doubling the interval.
- The EPA’s general guidance is to follow the manufacturer, typically 60 to 90 days.
MERV options for 16x20x2
Filterbuy lists its 16x20x2 in MERV 8, 11 and 13. The EPA describes MERV as the ASHRAE 52.2 rating of how well a filter captures 0.3 to 10 micron particles; higher numbers capture more, but a denser filter can restrict airflow in some systems. This site makes no health or medical claims about any rating.
Nearby 2-inch sizes
- 15x20x2 — 1 in narrower on the nominal face; Filterbuy actual 14.5 × 19.5 × 1.75 in
- 14x20x2 — 2 in narrower on the nominal face; Filterbuy actual 13.5 × 19.5 × 1.75 in
- 18x20x2 — 2 in wider on the nominal face; Filterbuy actual 17.5 × 19.5 × 1.75 in
- 12x20x2 — 4 in narrower on the nominal face; Filterbuy actual 11.5 × 19.5 × 1.75 in
- 16x16x2 — 4 in shorter on the nominal face; Filterbuy actual 15.5 × 15.5 × 1.75 in
- 16x24x2 — 4 in longer on the nominal face; Filterbuy actual 15.38 × 23.38 × 1.75 in
Where to buy a 16x20x2
As an Amazon Associate I earn from qualifying purchases.
The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.
Shop 16x20x2 at Filterbuy Search 16x20x2 filters on Amazon (paid link)
Prices are omitted because they change. Check the actual size listed by the seller before you order.
Frequently asked questions
- My old filter measures about 15.5 by 19.5 inches. Is it a 16x20x2?
- Very likely, if it is also about 1.75 inches thick. That matches Filterbuy’s published 16x20x2 cut of 15.5 × 19.5 × 1.75 in. Confirm with the nominal size on the frame when you can.
- Can I use a 16x20x1 instead of a 16x20x2?
- No. They share a 16 by 20 face, but a 1-inch filter needs a 1-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.
Sources
- Filterbuy, “16x20x2 Air Filters,” published actual size 15.5 × 19.5 × 1.75 in, model AFB16x20x2M8, available ratings (retrieved 2026-11-19): https://filterbuy.com/air-filters/16x20x2/
- Filterbuy, “2 Inch Air Filters,” replacement guidance for 2-inch filters: https://filterbuy.com/two-inch-air-filters/
- Filterbuy, “16x25x2 Air Filters,” depth comparison of 1-, 2- and 4-inch filters: https://filterbuy.com/air-filters/16x25x2/
- U.S. EPA, “Guide to Air Cleaners in the Home,” including fit guidance and typical 60- to 90-day replacement: https://www.epa.gov/indoor-air-quality-iaq/guide-air-cleaners-home
- U.S. EPA, “What is a MERV rating?”: https://www.epa.gov/indoor-air-quality-iaq/what-merv-rating