12x20x2 air filter size
A 12x20x2 is a 2-inch furnace and AC filter with a 12 by 20 inch nominal face. That printed size is for ordering. Filterbuy publishes its 12x20x2 cut at 11.5 × 19.5 × 1.75 in, which is 0.5 inch under on the 12-inch side, 0.5 inch under on the 20-inch side, and 0.25 inch thinner than the nominal 2 inch.
- Nominal size (what you order)
- 12 × 20 × 2 in
Nominal face area 12 × 20 = 240 square inches.
- Filterbuy published actual size
- 11.5 × 19.5 × 1.75 in
Other brands may cut this size slightly differently. Read the label on the filter you have.
12x20x2 actual dimensions
| Brand / product | Published actual size | Source |
|---|---|---|
| Filterbuy 12x20x2 (model AFB11.5x19.5x2M8) | 11.5 × 19.5 × 1.75 in | Filterbuy 12x20x2 page, its production cut |
Checking that 12x20x2 is your size
Start with the nominal size printed on the old filter’s frame; if it reads 12x20x2, order that. If the print is gone, measure the old filter. A reading near 11.5 by 19.5 inches and about 1.75 inches thick matches Filterbuy’s published 12x20x2 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.
12x20 in other depths
The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.
| Size | Published actual size | Slot depth |
|---|---|---|
| 12x20x2 (this page) | 11.5 × 19.5 × 1.75 in | 2-inch |
| 12x20x1 | 11.5 × 19.5 × 0.75 in | 1-inch |
| 12x20x4 | 11.5 × 19.5 × 3.63 in | 4-inch |
Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.
What a 2-inch 12x20x2 fits
A 12x20x2 needs a 2-inch filter rack. Filterbuy cuts its 2-inch media to 1.75 inches deep, against 0.75 inch for its 1-inch filters, and its 16x25x2 guide notes that two 1-inch filters cannot be stacked to make up the depth. Filterbuy’s 2-inch guide says a 2-inch filter will not fit a 1-inch rack, so measure the slot depth before ordering.
How often to replace a 12x20x2
- Filterbuy’s 2-inch guide answers “about every 90 days in a typical home,” sooner with pets or heavy pollen or wildfire smoke.
- Its 16x25x2 comparison lists the same 60- to 90-day band for 1-inch and 2-inch filters: the extra depth adds margin rather than doubling the interval.
- The EPA’s general guidance is to follow the manufacturer, typically 60 to 90 days.
MERV options for 12x20x2
Filterbuy lists its 12x20x2 in MERV 8, 11 and 13. MERV comes from ASHRAE Standard 52.2. The EPA explains that a higher MERV captures more of the particles in the 0.3 to 10 micron test range, and that a higher rating can also add airflow resistance, so pick one your system accepts. This site makes no health or medical claims about any rating.
Nearby 2-inch sizes
- 14x20x2 — 2 in wider on the nominal face; Filterbuy actual 13.5 × 19.5 × 1.75 in
- 15x20x2 — 3 in wider on the nominal face; Filterbuy actual 14.5 × 19.5 × 1.75 in
- 12x24x2 — 4 in longer on the nominal face; Filterbuy actual 11.38 × 23.38 × 1.75 in
- 16x20x2 — 4 in wider on the nominal face; Filterbuy actual 15.5 × 19.5 × 1.75 in
- 18x20x2 — 6 in wider on the nominal face; Filterbuy actual 17.5 × 19.5 × 1.75 in
- 12x12x2 — 8 in shorter on the nominal face; Filterbuy actual 11.5 × 11.5 × 1.75 in
Where to buy a 12x20x2
As an Amazon Associate I earn from qualifying purchases.
The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.
Shop 12x20x2 at Filterbuy Search 12x20x2 filters on Amazon (paid link)
Prices are omitted because they change. Check the actual size listed by the seller before you order.
Frequently asked questions
- My old filter measures about 11.5 by 19.5 inches. Is it a 12x20x2?
- Very likely, if it is also about 1.75 inches thick. That matches Filterbuy’s published 12x20x2 cut of 11.5 × 19.5 × 1.75 in. Confirm with the nominal size on the frame when you can.
- Can I use a 12x20x1 instead of a 12x20x2?
- No. They share a 12 by 20 face, but a 1-inch filter needs a 1-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.
Sources
- Filterbuy, “12x20x2 Air Filters,” published actual size 11.5 × 19.5 × 1.75 in, model AFB11.5x19.5x2M8, available ratings (retrieved 2026-11-19): https://filterbuy.com/air-filters/12x20x2/
- Filterbuy, “2 Inch Air Filters,” replacement guidance for 2-inch filters: https://filterbuy.com/two-inch-air-filters/
- Filterbuy, “16x25x2 Air Filters,” depth comparison of 1-, 2- and 4-inch filters: https://filterbuy.com/air-filters/16x25x2/
- U.S. EPA, “Guide to Air Cleaners in the Home,” including fit guidance and typical 60- to 90-day replacement: https://www.epa.gov/indoor-air-quality-iaq/guide-air-cleaners-home
- U.S. EPA, “What is a MERV rating?”: https://www.epa.gov/indoor-air-quality-iaq/what-merv-rating