Filter Size Chart

Home / Furnace & AC filters / 12x20x4

12x20x4 air filter size

A 12x20x4 is a 4-inch furnace and AC filter with a 12 by 20 inch nominal face. That printed size is for ordering. Filterbuy publishes its 12x20x4 cut at 11.5 × 19.5 × 3.63 in, which is 0.5 inch under on the 12-inch side, 0.5 inch under on the 20-inch side, and 0.37 inch thinner than the nominal 4 inch.

Nominal size (what you order)
12 × 20 × 4 in

Nominal face area 12 × 20 = 240 square inches.

Filterbuy published actual size
11.5 × 19.5 × 3.63 in

Other brands may cut this size slightly differently. Read the label on the filter you have.

12x20x4 actual dimensions

Published actual dimensions for filters sold as 12x20x4. Figures are from the sources cited, not from measurements made for this site.
Brand / product Published actual size Source
Filterbuy 12x20x4 (model AFB11.5x19.5x4M8) 11.5 × 19.5 × 3.63 in Filterbuy 12x20x4 page, its production cut

Checking that 12x20x4 is your size

Start with the nominal size printed on the old filter’s frame; if it reads 12x20x4, order that. If the print is gone, measure the old filter. A reading near 11.5 by 19.5 inches and about 3.63 inches thick matches Filterbuy’s published 12x20x4 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.

12x20 in other depths

The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.

SizePublished actual sizeSlot depth
12x20x4 (this page)11.5 × 19.5 × 3.63 in4-inch
12x20x111.5 × 19.5 × 0.75 in1-inch
12x20x211.5 × 19.5 × 1.75 in2-inch

Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.

What a 4-inch 12x20x4 fits

A 12x20x4 only fits a system built with a 4-inch media cabinet or slot; Filterbuy’s 4-inch guide says a 1-inch slot will not take one. Filterbuy cuts its 4-inch filters about 3.63 inches deep.

Some media cabinets, such as Honeywell’s, take a filter about 4-3/8 inches deep that may be labeled 4-inch by one brand and 5-inch by another; Filterbuy sells that depth as 5-inch. Its 20x25x4 guide uses depth to tell them apart: an old filter 3.75 inches deep or less is a standard 4-inch; one between 4.25 and 4.5 inches calls for the 5-inch version.

How often to replace a 12x20x4

MERV options for 12x20x4

Filterbuy lists its 12x20x4 in MERV 8, 11 and 13. MERV is the ASHRAE 52.2 efficiency scale. Per the EPA, higher values trap more particles between 0.3 and 10 microns; check your equipment manual before moving to a higher rating, because airflow resistance can rise. This site makes no health or medical claims about any rating.

Nearby 4-inch sizes

Where to buy a 12x20x4

As an Amazon Associate I earn from qualifying purchases.

The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.

Shop 12x20x4 at Filterbuy Search 12x20x4 filters on Amazon

Prices are omitted because they change. Check the actual size listed by the seller before you order.

Frequently asked questions

My old filter measures about 11.5 by 19.5 inches. Is it a 12x20x4?
Very likely, if it is also about 3.63 inches thick. That matches Filterbuy’s published 12x20x4 cut of 11.5 × 19.5 × 3.63 in. Confirm with the nominal size on the frame when you can.
Can I use a 12x20x1 instead of a 12x20x4?
No. They share a 12 by 20 face, but a 1-inch filter needs a 1-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.

Sources