18x30x1 air filter size
A 18x30x1 is a 1-inch furnace and AC filter with a 18 by 30 inch nominal face. That printed size is for ordering. Filterbuy publishes its 18x30x1 cut at 17.75 × 29.75 × 0.75 in, which is 0.25 inch under on the 18-inch side, 0.25 inch under on the 30-inch side, and 0.25 inch thinner than the nominal 1 inch.
- Nominal size (what you order)
- 18 × 30 × 1 in
Nominal face area 18 × 30 = 540 square inches.
- Filterbuy published actual size
- 17.75 × 29.75 × 0.75 in
Other brands may cut this size slightly differently. Read the label on the filter you have.
18x30x1 actual dimensions
| Brand / product | Published actual size | Source |
|---|---|---|
| Filterbuy 18x30x1 (model AFB18x30x1M8) | 17.75 × 29.75 × 0.75 in | Filterbuy 18x30x1 page, its production cut |
Checking that 18x30x1 is your size
Start with the nominal size printed on the old filter’s frame; if it reads 18x30x1, order that. If the print is gone, measure the old filter. A reading near 17.75 by 29.75 inches and about 0.75 inch thick matches Filterbuy’s published 18x30x1 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.
What a 1-inch 18x30x1 fits
A 18x30x1 goes in a standard 1-inch filter slot: usually a slide-in opening next to the furnace or air handler, or behind a return-air grille, which Trane lists as the common filter locations. Filterbuy cuts its 1-inch filters 0.75 inch deep. A 18x30x1 is not a substitute for a 2-inch or 4-inch filter of the same face size; order the depth your slot was built for.
How often to replace a 18x30x1
- Filtrete says to change a 1-inch filter at least every 90 days.
- Filterbuy’s 4-inch guide contrasts its several-month interval with every 1 to 3 months for a 1-inch panel, depending on the system, MERV rating, pets and air quality.
- The EPA says manufacturers typically recommend replacement every 60 to 90 days, and to change sooner if filters look heavily soiled.
MERV options for 18x30x1
Filterbuy lists its 18x30x1 in MERV 8, 11 and 13 plus an Odor Eliminator version with an activated carbon layer (see carbon filters). The EPA describes MERV as the ASHRAE 52.2 rating of how well a filter captures 0.3 to 10 micron particles; higher numbers capture more, but a denser filter can restrict airflow in some systems. This site makes no health or medical claims about any rating.
Nearby 1-inch sizes
- 20x30x1 — 2 in wider on the nominal face; Filterbuy actual 19.63 × 29.63 × 0.75 in
- 14x30x1 — 4 in narrower on the nominal face; Filterbuy actual 13.88 × 29.88 × 0.75 in
- 12x30x1 — 6 in narrower on the nominal face; Filterbuy actual 11.88 × 29.88 × 0.75 in
- 18x24x1 — 6 in shorter on the nominal face; Filterbuy actual 17.38 × 23.38 × 0.75 in
- 24x30x1 — 6 in wider on the nominal face; Filterbuy actual 23.88 × 29.88 × 0.75 in
- 18x22x1 — 8 in shorter on the nominal face; Filterbuy actual 17.75 × 21.75 × 0.75 in
Where to buy a 18x30x1
As an Amazon Associate I earn from qualifying purchases.
The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.
Shop 18x30x1 at Filterbuy Search 18x30x1 filters on Amazon (paid link)
Prices are omitted because they change. Check the actual size listed by the seller before you order.
Frequently asked questions
- My old filter measures about 17.75 by 29.75 inches. Is it a 18x30x1?
- Very likely, if it is also about 0.75 inch thick. That matches Filterbuy’s published 18x30x1 cut of 17.75 × 29.75 × 0.75 in. Confirm with the nominal size on the frame when you can.
Sources
- Filterbuy, “18x30x1 Air Filters,” published actual size 17.75 × 29.75 × 0.75 in, model AFB18x30x1M8, available ratings (retrieved 2026-11-19): https://filterbuy.com/air-filters/18x30x1/
- Filtrete / 3M, 1-inch MPR 1900 filter page, change at least every 90 days: https://www.filtrete.com/3M/en_US/p/d/b00039899/
- Filterbuy, “4 Inch Air Filters,” media cabinet requirement and change interval: https://filterbuy.com/four-inch-air-filters/
- U.S. EPA, “Guide to Air Cleaners in the Home,” including fit guidance and typical 60- to 90-day replacement: https://www.epa.gov/indoor-air-quality-iaq/guide-air-cleaners-home
- Trane, “Furnace Filter Guide,” on filter locations next to the furnace or air handler and at return vents: https://www.trane.com/residential/en/resources/troubleshooting/gas-furnaces/furnace-filter-guide/
- U.S. EPA, “What is a MERV rating?”: https://www.epa.gov/indoor-air-quality-iaq/what-merv-rating