Filter Size Chart

Home / Furnace & AC filters / 24x30x1

24x30x1 air filter size

A 24x30x1 is a 1-inch furnace and AC filter with a 24 by 30 inch nominal face. That printed size is for ordering. Filterbuy publishes its 24x30x1 cut at 23.88 × 29.88 × 0.75 in, which is 0.12 inch under on the 24-inch side, 0.12 inch under on the 30-inch side, and 0.25 inch thinner than the nominal 1 inch.

Nominal size (what you order)
24 × 30 × 1 in

Nominal face area 24 × 30 = 720 square inches.

Filterbuy published actual size
23.88 × 29.88 × 0.75 in

Other brands may cut this size slightly differently. Read the label on the filter you have.

24x30x1 actual dimensions

Published actual dimensions for filters sold as 24x30x1. Figures are from the sources cited, not from measurements made for this site.
Brand / product Published actual size Source
Filterbuy 24x30x1 (model AFB24x30x1M8) 23.88 × 29.88 × 0.75 in Filterbuy 24x30x1 page, its production cut

Checking that 24x30x1 is your size

Start with the nominal size printed on the old filter’s frame; if it reads 24x30x1, order that. If the print is gone, measure the old filter. A reading near 23.88 by 29.88 inches and about 0.75 inch thick matches Filterbuy’s published 24x30x1 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.

What a 1-inch 24x30x1 fits

A 24x30x1 goes in a standard 1-inch filter slot: usually a slide-in opening next to the furnace or air handler, or behind a return-air grille, which Trane lists as the common filter locations. Filterbuy cuts its 1-inch filters 0.75 inch deep. A 24x30x1 is not a substitute for a 2-inch or 4-inch filter of the same face size; order the depth your slot was built for.

How often to replace a 24x30x1

MERV options for 24x30x1

Filterbuy lists its 24x30x1 in MERV 8, 11 and 13 plus an Odor Eliminator version with an activated carbon layer (see carbon filters). The EPA describes MERV as the ASHRAE 52.2 rating of how well a filter captures 0.3 to 10 micron particles; higher numbers capture more, but a denser filter can restrict airflow in some systems. This site makes no health or medical claims about any rating.

Nearby 1-inch sizes

Where to buy a 24x30x1

As an Amazon Associate I earn from qualifying purchases.

The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.

Shop 24x30x1 at Filterbuy Search 24x30x1 filters on Amazon

Prices are omitted because they change. Check the actual size listed by the seller before you order.

Frequently asked questions

My old filter measures about 23.88 by 29.88 inches. Is it a 24x30x1?
Very likely, if it is also about 0.75 inch thick. That matches Filterbuy’s published 24x30x1 cut of 23.88 × 29.88 × 0.75 in. Confirm with the nominal size on the frame when you can.

Sources