Filter Size Chart

Home / Furnace & AC filters / 20x20x2

20x20x2 air filter size

A 20x20x2 is a 2-inch furnace and AC filter with a 20 by 20 inch nominal face. That printed size is for ordering. Filterbuy publishes its 20x20x2 cut at 19.5 × 19.5 × 1.75 in, which is 0.5 inch under on the 20-inch side, 0.5 inch under on the 20-inch side, and 0.25 inch thinner than the nominal 2 inch.

Nominal size (what you order)
20 × 20 × 2 in

Nominal face area 20 × 20 = 400 square inches.

Filterbuy published actual size
19.5 × 19.5 × 1.75 in

Other brands may cut this size slightly differently. Read the label on the filter you have.

20x20x2 actual dimensions

Published actual dimensions for filters sold as 20x20x2. Figures are from the sources cited, not from measurements made for this site.
Brand / product Published actual size Source
Filterbuy 20x20x2 (model AFB20x20x2M8) 19.5 × 19.5 × 1.75 in Filterbuy 20x20x2 page, its production cut

Checking that 20x20x2 is your size

Start with the nominal size printed on the old filter’s frame; if it reads 20x20x2, order that. If the print is gone, measure the old filter. A reading near 19.5 by 19.5 inches and about 1.75 inches thick matches Filterbuy’s published 20x20x2 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.

20x20 in other depths

The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.

SizePublished actual sizeSlot depth
20x20x2 (this page)19.5 × 19.5 × 1.75 in2-inch
20x20x119.5 × 19.5 × 0.75 in1-inch
20x20x419.5 × 19.5 × 3.63 in4-inch

Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.

What a 2-inch 20x20x2 fits

A 20x20x2 needs a 2-inch filter rack. Filterbuy cuts its 2-inch media to 1.75 inches deep, against 0.75 inch for its 1-inch filters, and its 16x25x2 guide notes that two 1-inch filters cannot be stacked to make up the depth. Filterbuy’s 2-inch guide says a 2-inch filter will not fit a 1-inch rack, so measure the slot depth before ordering.

How often to replace a 20x20x2

MERV options for 20x20x2

Filterbuy lists its 20x20x2 in MERV 8, 11 and 13. MERV comes from ASHRAE Standard 52.2. The EPA explains that a higher MERV captures more of the particles in the 0.3 to 10 micron test range, and that a higher rating can also add airflow resistance, so pick one your system accepts. This site makes no health or medical claims about any rating.

Nearby 2-inch sizes

Where to buy a 20x20x2

As an Amazon Associate I earn from qualifying purchases.

The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.

Shop 20x20x2 at Filterbuy Search 20x20x2 filters on Amazon

Prices are omitted because they change. Check the actual size listed by the seller before you order.

Frequently asked questions

My old filter measures about 19.5 by 19.5 inches. Is it a 20x20x2?
Very likely, if it is also about 1.75 inches thick. That matches Filterbuy’s published 20x20x2 cut of 19.5 × 19.5 × 1.75 in. Confirm with the nominal size on the frame when you can.
Can I use a 20x20x1 instead of a 20x20x2?
No. They share a 20 by 20 face, but a 1-inch filter needs a 1-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.

Sources