Filter Size Chart

Home / Furnace & AC filters / 25x25x1

25x25x1 air filter size

A 25x25x1 is a 1-inch furnace and AC filter with a 25 by 25 inch nominal face. That printed size is for ordering. Filterbuy publishes its 25x25x1 cut at 24.5 × 24.5 × 0.75 in, which is 0.5 inch under on the 25-inch side, 0.5 inch under on the 25-inch side, and 0.25 inch thinner than the nominal 1 inch.

Nominal size (what you order)
25 × 25 × 1 in

Nominal face area 25 × 25 = 625 square inches.

Filterbuy published actual size
24.5 × 24.5 × 0.75 in

Other brands may cut this size slightly differently. Read the label on the filter you have.

25x25x1 actual dimensions

Published actual dimensions for filters sold as 25x25x1. Figures are from the sources cited, not from measurements made for this site.
Brand / product Published actual size Source
Filterbuy 25x25x1 (model AFB25x25x1M8) 24.5 × 24.5 × 0.75 in Filterbuy 25x25x1 page, its production cut

Checking that 25x25x1 is your size

Start with the nominal size printed on the old filter’s frame; if it reads 25x25x1, order that. If the print is gone, measure the old filter. A reading near 24.5 by 24.5 inches and about 0.75 inch thick matches Filterbuy’s published 25x25x1 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.

25x25 in other depths

The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.

SizePublished actual sizeSlot depth
25x25x1 (this page)24.5 × 24.5 × 0.75 in1-inch
25x25x224.75 × 24.75 × 1.75 in2-inch
25x25x424.5 × 24.5 × 3.75 in4-inch

Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.

What a 1-inch 25x25x1 fits

A 25x25x1 goes in a standard 1-inch filter slot: usually a slide-in opening next to the furnace or air handler, or behind a return-air grille, which Trane lists as the common filter locations. Filterbuy cuts its 1-inch filters 0.75 inch deep. A 25x25x1 is not a substitute for a 2-inch or 4-inch filter of the same face size; order the depth your slot was built for.

How often to replace a 25x25x1

MERV options for 25x25x1

Filterbuy lists its 25x25x1 in MERV 8, 11 and 13. The EPA describes MERV as the ASHRAE 52.2 rating of how well a filter captures 0.3 to 10 micron particles; higher numbers capture more, but a denser filter can restrict airflow in some systems. This site makes no health or medical claims about any rating.

Nearby 1-inch sizes

Where to buy a 25x25x1

As an Amazon Associate I earn from qualifying purchases.

The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.

Shop 25x25x1 at Filterbuy Search 25x25x1 filters on Amazon

Prices are omitted because they change. Check the actual size listed by the seller before you order.

Frequently asked questions

My old filter measures about 24.5 by 24.5 inches. Is it a 25x25x1?
Very likely, if it is also about 0.75 inch thick. That matches Filterbuy’s published 25x25x1 cut of 24.5 × 24.5 × 0.75 in. Confirm with the nominal size on the frame when you can.
Can I use a 25x25x2 instead of a 25x25x1?
No. They share a 25 by 25 face, but a 2-inch filter needs a 2-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.

Sources