Filter Size Chart

Home / Furnace & AC filters / 20x30x4

20x30x4 air filter size

A 20x30x4 is a 4-inch furnace and AC filter with a 20 by 30 inch nominal face. That printed size is for ordering. Filterbuy publishes its 20x30x4 cut at 19.5 × 29.5 × 3.63 in, which is 0.5 inch under on the 20-inch side, 0.5 inch under on the 30-inch side, and 0.37 inch thinner than the nominal 4 inch.

Nominal size (what you order)
20 × 30 × 4 in

Nominal face area 20 × 30 = 600 square inches.

Filterbuy published actual size
19.5 × 29.5 × 3.63 in

Other brands may cut this size slightly differently. Read the label on the filter you have.

20x30x4 actual dimensions

Published actual dimensions for filters sold as 20x30x4. Figures are from the sources cited, not from measurements made for this site.
Brand / product Published actual size Source
Filterbuy 20x30x4 (model AFB20x30x4M8) 19.5 × 29.5 × 3.63 in Filterbuy 20x30x4 page, its production cut

Checking that 20x30x4 is your size

Start with the nominal size printed on the old filter’s frame; if it reads 20x30x4, order that. If the print is gone, measure the old filter. A reading near 19.5 by 29.5 inches and about 3.63 inches thick matches Filterbuy’s published 20x30x4 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.

20x30 in other depths

The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.

SizePublished actual sizeSlot depth
20x30x4 (this page)19.5 × 29.5 × 3.63 in4-inch
20x30x119.63 × 29.63 × 0.75 in1-inch
20x30x219.75 × 29.75 × 1.75 in2-inch

Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.

What a 4-inch 20x30x4 fits

A 20x30x4 only fits a system built with a 4-inch media cabinet or slot; Filterbuy’s 4-inch guide says a 1-inch slot will not take one. Filterbuy cuts its 4-inch filters about 3.63 inches deep.

Some media cabinets, such as Honeywell’s, take a filter about 4-3/8 inches deep that may be labeled 4-inch by one brand and 5-inch by another; Filterbuy sells that depth as 5-inch. Its 20x25x4 guide uses depth to tell them apart: an old filter 3.75 inches deep or less is a standard 4-inch; one between 4.25 and 4.5 inches calls for the 5-inch version.

How often to replace a 20x30x4

MERV options for 20x30x4

Filterbuy lists its 20x30x4 in MERV 8, 11 and 13. The EPA describes MERV as the ASHRAE 52.2 rating of how well a filter captures 0.3 to 10 micron particles; higher numbers capture more, but a denser filter can restrict airflow in some systems. This site makes no health or medical claims about any rating.

Nearby 4-inch sizes

Where to buy a 20x30x4

As an Amazon Associate I earn from qualifying purchases.

The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.

Shop 20x30x4 at Filterbuy Search 20x30x4 filters on Amazon

Prices are omitted because they change. Check the actual size listed by the seller before you order.

Frequently asked questions

My old filter measures about 19.5 by 29.5 inches. Is it a 20x30x4?
Very likely, if it is also about 3.63 inches thick. That matches Filterbuy’s published 20x30x4 cut of 19.5 × 29.5 × 3.63 in. Confirm with the nominal size on the frame when you can.
Can I use a 20x30x1 instead of a 20x30x4?
No. They share a 20 by 30 face, but a 1-inch filter needs a 1-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.

Sources