20x30x2 air filter size
A 20x30x2 is a 2-inch furnace and AC filter with a 20 by 30 inch nominal face. That printed size is for ordering. Filterbuy publishes its 20x30x2 cut at 19.75 × 29.75 × 1.75 in, which is 0.25 inch under on the 20-inch side, 0.25 inch under on the 30-inch side, and 0.25 inch thinner than the nominal 2 inch.
- Nominal size (what you order)
- 20 × 30 × 2 in
Nominal face area 20 × 30 = 600 square inches.
- Filterbuy published actual size
- 19.75 × 29.75 × 1.75 in
Other brands may cut this size slightly differently. Read the label on the filter you have.
20x30x2 actual dimensions
| Brand / product | Published actual size | Source |
|---|---|---|
| Filterbuy 20x30x2 (model AFB20x30x2M8) | 19.75 × 29.75 × 1.75 in | Filterbuy 20x30x2 page, its production cut |
Checking that 20x30x2 is your size
Start with the nominal size printed on the old filter’s frame; if it reads 20x30x2, order that. If the print is gone, measure the old filter. A reading near 19.75 by 29.75 inches and about 1.75 inches thick matches Filterbuy’s published 20x30x2 cut. Install the new filter with the frame arrow pointing toward the furnace or air handler, and make sure it seats without bending; the EPA advises a fit with no air gaps around the edges.
20x30 in other depths
The first two numbers can match while the depth does not. These are separate filters, and each needs a slot or cabinet of its own depth.
| Size | Published actual size | Slot depth |
|---|---|---|
| 20x30x2 (this page) | 19.75 × 29.75 × 1.75 in | 2-inch |
| 20x30x1 | 19.63 × 29.63 × 0.75 in | 1-inch |
| 20x30x4 | 19.5 × 29.5 × 3.63 in | 4-inch |
Actual sizes from Filterbuy’s size pages, except 5-inch rows, which come from the sources on those pages.
What a 2-inch 20x30x2 fits
A 20x30x2 needs a 2-inch filter rack. Filterbuy cuts its 2-inch media to 1.75 inches deep, against 0.75 inch for its 1-inch filters, and its 16x25x2 guide notes that two 1-inch filters cannot be stacked to make up the depth. Filterbuy’s 2-inch guide says a 2-inch filter will not fit a 1-inch rack, so measure the slot depth before ordering.
How often to replace a 20x30x2
- Filterbuy’s 2-inch guide answers “about every 90 days in a typical home,” sooner with pets or heavy pollen or wildfire smoke.
- Its 16x25x2 comparison lists the same 60- to 90-day band for 1-inch and 2-inch filters: the extra depth adds margin rather than doubling the interval.
- The EPA’s general guidance is to follow the manufacturer, typically 60 to 90 days.
MERV options for 20x30x2
Filterbuy lists its 20x30x2 in MERV 8, 11 and 13. MERV comes from ASHRAE Standard 52.2. The EPA explains that a higher MERV captures more of the particles in the 0.3 to 10 micron test range, and that a higher rating can also add airflow resistance, so pick one your system accepts. This site makes no health or medical claims about any rating.
Nearby 2-inch sizes
- 20x25x2 — 5 in shorter on the nominal face; Filterbuy actual 19.5 × 24.5 × 1.75 in
- 20x24x2 — 6 in shorter on the nominal face; Filterbuy actual 19.38 × 23.38 × 1.75 in
- 20x20x2 — 10 in shorter on the nominal face; Filterbuy actual 19.5 × 19.5 × 1.75 in
- 18x20x2 — 2 in narrower, 10 in shorter on the nominal face; Filterbuy actual 17.5 × 19.5 × 1.75 in
- 16x20x2 — 4 in narrower, 10 in shorter on the nominal face; Filterbuy actual 15.5 × 19.5 × 1.75 in
- 15x20x2 — 5 in narrower, 10 in shorter on the nominal face; Filterbuy actual 14.5 × 19.5 × 1.75 in
Where to buy a 20x30x2
As an Amazon Associate I earn from qualifying purchases.
The Amazon button is an affiliate link (paid link). The Filterbuy button goes to Filterbuy’s official page and is not an affiliate link yet.
Shop 20x30x2 at Filterbuy Search 20x30x2 filters on Amazon (paid link)
Prices are omitted because they change. Check the actual size listed by the seller before you order.
Frequently asked questions
- My old filter measures about 19.75 by 29.75 inches. Is it a 20x30x2?
- Very likely, if it is also about 1.75 inches thick. That matches Filterbuy’s published 20x30x2 cut of 19.75 × 29.75 × 1.75 in. Confirm with the nominal size on the frame when you can.
- Can I use a 20x30x1 instead of a 20x30x2?
- No. They share a 20 by 30 face, but a 1-inch filter needs a 1-inch slot or cabinet. Order the depth printed on your old filter or measured in the slot.
Sources
- Filterbuy, “20x30x2 Air Filters,” published actual size 19.75 × 29.75 × 1.75 in, model AFB20x30x2M8, available ratings (retrieved 2026-11-19): https://filterbuy.com/air-filters/20x30x2/
- Filterbuy, “2 Inch Air Filters,” replacement guidance for 2-inch filters: https://filterbuy.com/two-inch-air-filters/
- Filterbuy, “16x25x2 Air Filters,” depth comparison of 1-, 2- and 4-inch filters: https://filterbuy.com/air-filters/16x25x2/
- U.S. EPA, “Guide to Air Cleaners in the Home,” including fit guidance and typical 60- to 90-day replacement: https://www.epa.gov/indoor-air-quality-iaq/guide-air-cleaners-home
- U.S. EPA, “What is a MERV rating?”: https://www.epa.gov/indoor-air-quality-iaq/what-merv-rating